Outlet Installation in Ann Arbor, MI

Outlet and Circuit Installation in Ann Arbor

There's never an outlet where the new desk goes, the garage has one plug for everything, and the kitchen breaker trips when the toaster and kettle run together. We handle outlet installation and new circuits across Ann Arbor and Washtenaw County, from GFCI outlets in the bathroom to a 240V outlet for the dryer, range or workshop.

GFCI and tamper-resistant outlet installation

240V outlets for dryers, ranges and shops

Dedicated circuits for major appliances

Garage, workshop and outdoor outlets

Outlet Installation for How You Actually Use Your Home

Most homes weren’t wired for the way people live now. Home offices, charging stations, entertainment centers and garage workshops all need power in places the original builder never planned for. The result is extension cords, power strips and breakers that trip at the worst time.

Our outlet installation work puts power where you need it, on circuits sized for what you plug in. We handle everything from a single new outlet to a set of new circuits for a finished space.

GFCI Outlet Installation

A GFCI (ground fault circuit interrupter) outlet watches the current going out and coming back. If some of it leaks away, for example through a wet hand, it shuts off in a fraction of a second. That’s why they belong near water.

We install GFCI outlets and GFCI breakers in:

Bathrooms and powder rooms
Kitchen countertop areas and islands
Laundry rooms and utility sinks
Garages and unfinished basements
Outdoor outlets and near pools or hot tubs

Many Ann Arbor homes have only some of these covered. GFCI outlet installation is one of the simplest safety upgrades you can make, and we can often do several locations in one visit.

240V Outlet Installation for Dryers, Ranges and Shops

Most household outlets run at 120 volts. Big appliances and heavy equipment need 240 volts. We install 240V outlets and circuits for:

Electric dryers and ranges, including swaps from gas to electric
Welders, air compressors, table saws and other shop tools
Kilns, heaters and other specialty equipment

Every 240V job starts with the equipment’s specs and a look at your panel. If the panel is full or near its limit, we’ll talk through your options, including an electrical panel upgrade. For vehicle charging, see our EV charger installation page.

Dedicated Circuits for Appliances

A dedicated circuit gives one appliance its own breaker and wiring. It’s the fix for a microwave that trips the kitchen lights, or a freezer that shares a circuit with the basement outlets.

We commonly add dedicated circuits for refrigerators, microwaves, dishwashers, disposals, sump pumps, space heaters, home offices and media rooms. If a circuit keeps tripping and you’re not sure why, our electrical repair visit will find the cause first.

Garage and Workshop Wiring

A garage with one outlet and a bare bulb doesn’t go far. We wire garages and workshops with enough outlets along the walls, dedicated circuits for tools, better lighting and GFCI protection throughout.

For detached garages and outbuildings, we can run a feeder from the house to a small subpanel. That gives you room for lights, outlets, a heater and 240V equipment without overloading the main panel.

USB, Tamper-Resistant and Outdoor Outlets

A few smaller upgrades make a big difference day to day:

USB outlets charge phones and tablets without adapters. They’re popular in kitchens, bedrooms and offices.
Tamper-resistant outlets have internal shutters that block anything other than a proper plug. They’re required in new work and are a smart choice for homes with young kids.
Outdoor outlets with weather-resistant covers make holiday lights, yard tools and patio heaters easier to power.
Two-prong outlet replacement brings older rooms up to date with grounded or GFCI-protected outlets.

Planning New Circuits in a Remodel

If you’re finishing a basement or updating a kitchen, it’s the best time to add outlets and circuits. Code sets minimum spacing for outlets in living spaces, and kitchens need several dedicated countertop circuits. We plan all of it with our remodeling work so the walls only open once.

What Affects the Cost of New Outlets and Circuits

Every outlet job is a little different, so we look at the space before estimating the time involved. The biggest factors are:

How far the new outlet or circuit is from the panel
Whether walls and ceilings are open, finished or plaster
The voltage and amperage the equipment needs
Open space and spare capacity in your panel
How many locations we can handle in one visit

Grouping several outlets or circuits into one visit usually makes the most sense.

Why Ann Arbor Homeowners Choose Us

Current Electrical Systems has been wiring homes around Ann Arbor since 1994, and our electricians are union trained through IBEW Local 252. We size every circuit for what it will actually carry, label it in your panel and leave the work area clean. There’s no scheduling fee, and you pay only for the time we work.

Outlets & Dedicated Circuits FAQs

Where Are GFCI Outlets Required?

Current electrical code calls for GFCI protection in wet and damp locations, including bathrooms, kitchens near the counters, laundry areas, garages, unfinished basements, crawl spaces and outdoors. Older homes may not have them in every spot. We can add GFCI outlets or GFCI breakers to bring those areas up to today's safety standards.

Can You Replace Two-Prong Outlets With Three-Prong Outlets?

Yes, but a three-prong outlet needs a ground to be truly grounded. If the circuit has a ground wire or grounded metal box, we connect to it. If not, code allows a GFCI-protected outlet labeled "no equipment ground," or we can run a new grounded circuit. We'll explain which option fits your home.

What Is a Dedicated Circuit?

A dedicated circuit feeds one appliance only, with its own breaker in the panel. Refrigerators, microwaves, dishwashers, space heaters, sump pumps and many power tools run best on their own circuit so they don't trip breakers shared with other outlets.

Can You Install a 240V Outlet in My Garage for a Welder or Compressor?

Yes. We check the equipment's nameplate, confirm your panel has room and capacity, then run a properly sized 240V circuit and install the matching receptacle. If you're also thinking about an EV charger, we can plan both at once so the panel handles everything.

How Long Does It Take to Add a New Outlet?

Adding an outlet near an existing circuit in an accessible wall often takes a couple of hours. A new dedicated circuit from the panel, or a run through finished walls and ceilings, can take longer. We'll give you a timeline before we start.